Horizontal Decanter Centrifuges Used In mud process for drillings and mud related materials
Specification on APGLW355x1258
| Flow rate | 154GPM |
| Drum diameter | 355mm |
| Drum length | 1258mm |
| Lambda ratio | 3.5 |
| Drum shape | Conical |
| Speed | 3200rpm |
| Main motor | 30kw (Customizable) |
| Back drive motor | 7.5kw (Customizable) |
| Max. capacity | 35m³/h |
| Separation point | 2~5microns |
| Separation factor | 2035G |
| Feeding pump | 7.5kw (Submersible or screw) |
| Weight | About 3000kg (Vary if VFD and different motor size) |
Decanter centrifuge information
Decanter centrifuges also referred to as decanting centrifuge or centrifuge decanter. In drilling mud process for oil & gas drilling there are middle-speed centrifuge and high-speed centrifuge. They can be designed as fixed frequency and variable frequency centrifuge.
Now in stock centrifuge high-speed one which model number is GLW355X1258 with 3200rpm speed and 35m³/h capacity. The bowl diameter is 355mm, while the length is 1258mm. The minimum separation point is 2 micron and its separation factor is 2035G
Centrifuge main motor is 30kw (40hp), the accessory motor is 7.5kw. This centrifuge in stock is a fixed frequency one. Upon clients’ demand, we can configure the VFD panel for it. Then the speed will be 0~3200rpm and VFD will lead to better protection on the motor as well as the whole centrifuge
Why select the Aipu decanter centrifuge?
All raw materials are of high quality. Such as the screw conveyor, bowl, the support frame, the surface paint, the motor, the control panel, etc.
Usually, finish one set centrifuge may take 30 days. But now, only in 1 week we’ll get all things cleared and make it arrive at the port. For other requirements or options, we’ll give you an optimal solution soonest.
Finally, our aftermarket will definitely satisfy you on soon response as 7×24 technique support. The centrifuge is rather mature to save more cost on wearing parts as well as maintenance
AIPU High-speed centrifuge spare parts
Main spare parts including the bearing, oil seal, coupling, the cushion base, the fuse, etc. These are rather easy to get in the market and cost little.
Other application of APGLW 355 centrifuges
As we introduced before, the centrifuges can be used not only in the drilling fluids process. They can be used in many industries. Related to the oil and gas industry or the drilling industry, they can be used in slurry separation, sludge treatment, waste management, and so on.
And in the drilling fluids system, they are used to recycle or reclaim the barite, too. When we use both middle-speed centrifuge and high-speed centrifuge, the high-speed one will be set behind the middle speed one.
Do you have any demand for centrifuges? No matter for solids control or for drilling waste management,or for the slurry separation and sludge treatment. Please feel free to contact us.
Product Tags:
|
|
154GPM Horizontal Drilling Mud Decanter Centrifuge Images
|
